UPDATE (2024-0318): The proper torque for our wheels is 140 ft. lbs., not 120, as I stated in the video. We have 17.5″ aluminum wheels with 9/16″ studs (with coned lug nuts). Be sure to research the proper torque for your particular setup.

RV Suspension Maintenance is not Rocket Science. It just takes some patience and a lot of shop towels!

In this video, I show how I:

  • Repacking bearings in the old-fashioned way by disassembling, cleaning, inspecting, greasing, and reassembling a wheel bearing.
  • Inspecting and replacing Disk Brake Pads
  • Greasing the MORryde Independent Suspension Torsion Bracket

I also go over greasing a stock suspension (with leaf springs and hangars) and using the Dexter EZ-Lube system.

Insider Access

We now have our Discord Server set up for those of you who want to dive deeper with us into these kinds of topics, RV life in general, or just want to support our channel. 😊

You can join here: youtube.com…

Once you're a member, you can find how to access the Inside Lane Discord here: youtube.com…

Scroll down to the Discord post and follow the link. We hope to see you there! 😀

Products 🛒


Some of the links/codes on this page are affiliate links, meaning if you choose to purchase using our links, we will earn a commission.  This commission comes at no additional cost to you but helps us keep providing the content we love to share.  We recommend these products because we have found them helpful and useful, not because of the small commissions we make. 
Every product we recommend, we use ourselves.


Subscribe! (FREE!)

Youtube